AudioCodes MediaPack Series MP-11x

Version 6.6 433 MP-11x & MP-124
User's Manual 42. SIP Message Manipulation Syntax

Modify the Unsupported header to 'replaces':
Unsupported: replaces
Message Type Condition Action Subject
Action
Type
Action Value
invite header.unsupported Modify 'replaces'

Set the path in the Unsupported headers options tag:
Unsupported: replaces, path
Message Type Condition Action Subject
Action
Type
Action Value
invite header.unsupported.path Add '1'
42.2.36 User-To-User and X-UserToUser
An example of the header is shown below:
X-UserToUser: 3030373435313734313635353b313233343b3834
The header properties are shown in the table below:
Header Level Action Add Delete Modify List Entries
Operations Supported Yes Yes Yes NA
Keyword Sub Types Attributes
User2User Enum UserToUser (see
'User-To-User and X-
UserToUser' on page 450)
Read/Write
PD Enum Protocol Descriptor
(see 'User-To-User and X-
UserToUser' on page 450)
Read/Write
Below are header manipulation examples:

Convert X-UserToUser header to User-To-User header as follows:
User-to-User:
043030373435313734313635353b313233343b3834;encoding=hex
Message Type Condition Action Subject
Action
Type
Action Value
header.X-
UserToUser.user2user
Modify '2'