24.13 Configuring Voice Mail
The Voice Mail Settings page allows you to configure the voice mail parameters. For a
description of these parameters, see 'Configuration Parameters Reference' on page 461.
Notes:
• The Voice Mail Settings page is available only for FXO interfaces.
• For more information on configuring voice mail, refer to the CPE
Configuration Guide for Voice Mail User's Manual.
To configure the Voice Mail parameters:
1. Open the Voice Mail Settings page (Configuration tab > VoIP menu > GW and IP to
IP > Advanced Applications > Voice Mail Settings).
2. Configure the parameters as required.
3. Click Submit to apply your changes.
4. To save the changes to flash memory, see 'Saving Configuration' on page 324.
To Next Page
Loading...
