AudioCodes MediaPack Series MP-11x

User's Manual 422 Document #: LTRT-65417
MP-11x & MP-124
42.2.22 Referred-By
An example of the header is shown below:
Referred-By: <sip:referrer@referrer.example>;
The header properties are shown in the table below:
Header Level Action Add Delete Modify List Entries
Operations Supported Yes Yes Yes N/A
Keyword Sub Types Attributes
param param Read/Write
URL URL Structure (see 'URL'
on page 438)
Read/Write
Below are header manipulation examples:

For all messages, add a Referred-By header as follows:
Referred-By: <sip: sip:refer@refer.com>
Message Type Condition Action Subject
Action
Type
Action Value
header.Referred-
By
Add '<sip:refer@refer.com>'

For all messages, modify the host as follows:
Referred-By: <sip:refer@yahoo.com>
Message Type Condition Action Subject
Action
Type
Action Value
header.Referred-
By.url.host
Add 'yahoo.com'

For all messages, add a new parameter to the header as follows:
Referred-By: <sip:referrer@yahoo.com>;p1=fxs
Message Type Condition Action Subject
Action
Type
Action Value
header.Referred-
By.param.p1
Add 'fxs'
42.2.23 Refer-To
An example of the header is shown below:
Refer-To: sip:conference1@example.com
Refer-To:
<sips:a8342043f@atlanta.example.com?Replaces=12345601%40atlanta.ex
ample.com%3bfrom-tag%3d314159%3bto-tag%3d1234567>
The header properties are shown in the table below: