Parameter Description
[MaxRADIUSSessions]
Defines the number of concurrent calls that can communicate with
the RADIUS server (optional).
The valid range is 0 to 240. The default value is 240.
EMS: RADIUS Auth Number of
Retries
[RADIUSRetransmission]
Defines the number of retransmission retries.
The valid range is 1 to 10. The default value is 3.
[RadiusTO]
Defines the time interval (measured in seconds) that the device
waits for a response before a RADIUS retransmission is issued.
The valid range is 1 to 30. The default value is 10.
43.6 Control Network Parameters
43.6.1 IP Group, Proxy, Registration and Authentication Parameters
The proxy server, registration and authentication SIP parameters are described in the table
below.
Table 43-28: Proxy, Registration and Authentication SIP Parameters
Parameter Description
IP Group Table
Web: IP Group Table
EMS: Endpoints > IP Group
[IPGroup]
This table configures IP Groups.
The ini file format of this parameter is as follows:
[IPGroup]
FORMAT IPGroup_Index = IPGroup_Type,
IPGroup_Description, IPGroup_ProxySetId,
IPGroup_SIPGroupName, IPGroup_ContactUser,
IPGroup_EnableSurvivability, IPGroup_ServingIPGroup,
IPGroup_SipReRoutingMode,
IPGroup_AlwaysUseRouteTable, IPGroup_RoutingMode,
IPGroup_SRD, IPGroup_MediaRealm,
IPGroup_ClassifyByProxySet, IPGroup_ProfileId,
IPGroup_MaxNumOfRegUsers, IPGroup_InboundManSet,
IPGroup_OutboundManSet, IPGroup_RegistrationMode,
IPGroup_AuthenticationMode, IPGroup_MethodList,
IPGroup_EnableSBCClientForking, IPGroup_SourceUriInput,
IPGroup_DestUriInput, IPGroup_ContactName;
[/IPGroup]
Notes:
 For this parameter to take effect, a device reset is required.
 For a description of this table, see 'Configuring IP Groups'
on page 173.
Authentication per Port Table
Web: Authentication Table
EMS: SIP Endpoints >
Authentication
[Authentication]
This table parameter defines a user name and password for
To Next Page
Loading...
Need help?
General
