[\Authentication]
Where,
 Index = port number, where 0 denotes the Port 1
For example:
Authentication 1 = lee,1552; (user name "lee" with password
1552 for authenticating Port 2)
Note: For a description o this table, see Configuring
Authentication on page 265.
Account Table
Web: Account Table
EMS: SIP Endpoints > Account
[Account]
This table parameter configures the Account table for
registering and/or authenticating (digest) Hunt Groups(e.g., an
IP-PBX) to another IP Group (e.g., an Internet Telephony
Service Provider - ITSP). The format of this parameter is as
follows:
[Account]
FORMAT Account_Index = Account_ServedTrunkGroup,
Account_ServedIPGroup, Account_ServingIPGroup,
Account_Username, Account_Password, Account_HostName,
Account_Register, Account_ContactUser,
Account_ApplicationType;
[\Account]
For example:
Account 1 = 1, -1, 1, user, 1234, acl, 1, ITSP1;
Note: For a detailed description of this table, see 'Configuring
Account Table' on page 181.
Proxy Registration Parameters
Web: Use Default Proxy
EMS: Proxy Used
[IsProxyUsed]
Enables the use of a SIP proxy server.
 [0] No = (Default) Proxy isn't used and instead, the internal
routing table is used.
 [1] Yes = Proxy server is used. Define the IP address of the
proxy server in the Proxy Sets table (see 'Configuring Proxy
Sets Table' on page 176).
Note: If you are not using a proxy server, you must define
outbound IP call routing rules in the Tel to IP Routing
(described in Configuring Tel to IP Routing on page 223).
Web/EMS: Proxy Name
[ProxyName]
Defines the Home Proxy domain name. If specified, this name
is used as the Request-URI in REGISTER, INVITE and other
SIP messages, and as the host part of the To header in INVITE
messages. If not specified, the Proxy IP address is used
instead.
The valid value is a string of up to 49 characters.
Note: This parameter functions together with the
UseProxyIPasHost parameter.
Web: Use Proxy IP as Host
[UseProxyIPasHost]
Enables the use of the proxy server's IP address (in dotted-
decimal notation) as the host name in SIP From and To
headers in REGISTER requests.
 [0] Disable (default)
 [1] Enable
To Next Page
Loading...
Need help?
General
