EasyManua.ls Logo

AudioCodes MediaPack Series MP-11x

AudioCodes MediaPack Series MP-11x
622 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 6.6 365 MP-11x & MP-124
User's Manual 36. Reporting Information to External Party
36.2.2 CDR Field Description
This section describes the CDR fields that are generated by the device.
36.2.2.1 CDR Fields for Gateway/IP-to-IP Application
The CDR fields for the Gateway / IP-to-IP application are listed in the table below.
Table 36-2: CDR Fields for Gateway/IP-to-IP Application
Field Name Description
GWReportType
Report type:
CALL_START
CALL_CONNECT
CALL_END
Cid
Port number
SessionId
SIP session identifier
Trunk
Physical trunk number
Note: This field is applicable only to the Gateway application.
BChan
Selected B-channel (set to '0', as not applicable)
Note: This field is applicable only to the Gateway application.
ConId
SIP conference ID
Note: This field is applicable only to the Gateway application.
TG
Trunk Group ID
Note: This field is applicable only to the Gateway application.
EPTyp
Endpoint type:
FXO
FXS
EANDM
ISDN
CAS
DAA
IPMEDIA
NETANN
STREAMING
TRANSPARENT
MSCML
VXML
IP2IP
Orig
Call originator:
LCL (Tel side)
RMT (IP side)
SourceIp
Source IP address
DestIp
Destination IP address

Table of Contents

Other manuals for AudioCodes MediaPack Series MP-11x

Related product manuals