AudioCodes MediaPack Series MP-11x User Manual

User's Manual 420 Document #: LTRT-65417
MP-11x & MP-124
Below are header manipulation examples:

For all messages, add a Privacy header and set it to "session" as follows:
Privacy: session
Message Type Condition Action Subject
Action
Type
Action Value
header.Privacy Add 'session'

For all messages, add "user" to the list as follows:
Privacy: session;user
Message Type Condition Action Subject
Action
Type
Action Value
header.privacy.privacy.user Modify '1'
42.2.20 Proxy-Require
An example of the header is shown below:
Proxy-Require: sec-agree
The header properties are shown in the table below:
Header Level Action Add Delete Modify List Entries
Operations Supported Yes Yes Yes N/A
Keyword Sub Types Attributes
Capabilities SIPCapabilities Struct Read/Write
Below are header manipulation examples:

For all messages, add a Proxy-Require header to the message as follows:
Proxy-Require: sec-agree
Message Type Condition Action Subject
Action
Type
Action Value
header.proxy-
require
Add 'sec-agree'

For all messages, modify the Proxy-Require header to "itsp.com" as follows:
Proxy-Require: itsp.com
Message Type Condition Action Subject
Action
Type
Action Value
header.proxy-
require
Modify 'itsp.com'

Set the 'privacy' options tag in the Proxy-Require header as follows:
Proxy-Require: itsp.com, privacy

AudioCodes MediaPack Series MP-11x Specifications

General

Brand	AudioCodes
Model	MediaPack Series MP-11x
Category	Gateway
Language	English