AudioCodes MediaPack Series MP-11x

Version 6.6 371 MP-11x & MP-124
User's Manual 36. Reporting Information to External Party
36.2.3 Supported RADIUS Attributes
The table below describes the RADIUS Accounting CDR attributes included in the
communication packets transmitted between the device and a RADIUS server.
Table 36-3: Supported RADIUS Accounting CDR Attributes
Attribute
Number
Attribute
Name
Vendor
Specific
Attribute
(VSA) No.
Purpose
Value
Format
Example AAA
Request Attributes
1 user-name - Account number or
calling party number
or blank
String
up to 15
digits
long
5421385747 Start Acc
Stop Acc
4 nas-ip-
address
- IP address of the
requesting device
Numeric 192.168.14.43 Start Acc
Stop Acc
6 service-type - Type of service
requested
Numeric 1: login Start Acc
Stop Acc
26 h323-
incoming-
conf-id
1 SIP call identifier Up to 32
octets
- Start Acc
Stop Acc
26 h323-remote-
address
23 IP address of the
remote gateway
Numeric - Stop Acc
26 h323-conf-id 24 H.323/SIP call
identifier
Up to 32
octets
- Start Acc
Stop Acc
26 h323-setup-
time
25 Setup time in NTP
format 1
String - Start Acc
Stop Acc
26 h323-call-
origin
26 The call’s originator:
Answering (IP) or
Originator (PSTN)
String Answer,
Originate etc
Start Acc
Stop Acc
26 h323-call-
type
27 Protocol type or
family used on this
leg of the call
String VoIP Start Acc
Stop Acc
26 h323-
connect-time
28 Connect time in NTP
format
String - Stop Acc
26 h323-
disconnect-
time
29 Disconnect time in
NTP format
String - Stop Acc
26 H323-
Disconnect-
Cause
30 Q.931 disconnect
cause code
Numeric - Stop Acc
26 h323-gw-id 33 Name of the gateway String SIPIDString Start Acc
Stop Acc
26 sip-call-id 34 SIP Call ID String abcde@ac.com Start Acc
Stop Acc
26 call- 35 The call's terminator: String Yes, No Stop Acc