5.2.4 LDAP Commands
The commands under the IPNetworking\OpenLdap directory allow you to perform various
Lightweight Directory Access Protocol (LDAP) actions.
Table 5-5: LDAP Commands
Sub-Command Arguments Description
LdapSTatus
- Displays the LDAP connection status.
LdapSearch
<search key> <attribute1>
[<attribute 2> ...<attribute
5>]
Searches an LDAP server. The parameters
enclosed by [] are optional.
LDapOpen
- Opens a connection to the LDAP server using
parameters provided in the configuration file.
LDapSetDebugmode
<mode> Sets the LdapDebugLevelMode parameter.
Possible levels 0-3.
LDapGetDebugmode
- Gets the LdapDebugLevelMode parameter
value
To Next Page
Loading...
