AudioCodes MediaPack Series MP-11x

Version 6.6 33 MP-11x & MP-124
User's Manual 3. Introduction
3 Introduction
This part provides an overview of the various management tools that can be used to
configure the device. It also provides step-by-step procedures on how to configure the
management settings.
The following management tools can be used to configure the device:

Embedded HTTP/S-based Web server - see 'Web-based Management' on page 35

Command Line Interface (CLI) - see 'CLI-Based Management' on page 71

AudioCodes Element Management System - see EMS-Based Management on page
85

Simple Network Management Protocol (SNMP) browser software - see 'SNMP-Based
Management' on page 79

Configuration ini file - see 'INI File-Based Management' on page 87
Notes:
• Some configuration settings can only be done using a specific
management tool. For example, some configuration can only be done
using the Configuration ini file method.
• Throughout this manual, where a parameter is mentioned, its
corresponding Web, CLI, and ini parameter is mentioned.
• For a list and description of all the configuration parameters, see
'Configuration Parameters Reference' on page 461.
• The ini file parameters are enclosed in square brackets [...].