AudioCodes MediaPack Series MP-11x User Manual

Version 6.6 429 MP-11x & MP-124
User's Manual 42. SIP Message Manipulation Syntax
Below are header manipulation examples:

Add two Service-Route headers as follows:
Service-Route:<P2.HOME.EXAMPLE.COM;lr>
Service-Route: <sip:HSP.HOME.EXAMPLE.COM;lr>
Message Type Condition Action Subject
Action
Type
Action Value
invite header.service-
route
Add '<P2.HOME.EXAMPLE.COM;lr>'
invite header.service-
route
Add '<sip:HSP.HOME.EXAMPLE.COM;lr>'

Modify the Service-Route header in list entry 1 as follows:
Service-Route:sip:itsp.com;lr
Service-Route: <sip:HSP.HOME.EXAMPLE.COM;lr>
Message Type Condition Action Subject
Action
Type
Action Value
invite header.service-
route.1.serviceroute
Modify '<sip:itsp.com;lr>'

Modify the Service-Route header in list entry 0 as follows:
Service-Route:sip:home.itsp.com;lr
Service-Route: <sip:itsp.com;lr>
Message Type Condition Action Subject
Action
Type
Action Value
invite header.service-
route.0.serviceroute
Modify '<sip:home.itsp.com;lr>'
42.2.31 Session-Expires
An example of the header is shown below:
Session-Expires: 480
The header properties are shown in the table below:
Header Level Action Add Delete Modify List Entries
Operations Supported Yes Yes Yes N/A
Keyword Sub Types Attributes
Param Param Read/Write
Refresher Enum Refresher (see
'Refresher' on page 449)
Read/Write
Time Integer Read/Write
Below are header manipulation examples:

For all messages, add a Session-Expires header as follows:
Session-Expires: 480

AudioCodes MediaPack Series MP-11x Specifications

General

Brand	AudioCodes
Model	MediaPack Series MP-11x
Category	Gateway
Language	English