Version 6.6 497 MP-11x & MP-124
User's Manual 43. Configuration Parameters Reference
'Configuring Web User Accounts' on page 60).
Web: RADIUS Authentication
Server IP Address
EMS: RADIUS Auth Server IP
[RADIUSAuthServerIP]
Defines the IP address of the RADIUS authentication server.
Note: For this parameter to take effect, a device reset is required.
Web: RADIUS Authentication
Server Port
EMS: RADIUS Auth Server Port
[RADIUSAuthPort]
Defines the port of the RADIUS Authentication Server.
Note: For this parameter to take effect, a device reset is required.
Web: RADIUS Shared Secret
EMS: RADIUS Auth Server
Secret
[SharedSecret]
Defines the 'Secret' used to authenticate the device to the
RADIUS server. This should be a cryptically strong password.
RADIUS Authentication Parameters
Web: Default Access Level
[DefaultAccessLevel]
Defines the default access level for the device when the RADIUS
(authentication) response doesn't include an access level
attribute.
The valid range is 0 to 255. The default value is 200 (i.e., Security
Administrator).
Web: Device Behavior Upon
RADIUS Timeout
[BehaviorUponRadiusTimeout]
Defines the device's response upon a RADIUS timeout.
 [0] Deny Access = Denies access.
 [1] Verify Access Locally = (Default) Checks password locally.
Web: Local RADIUS Password
Cache Mode
[RadiusLocalCacheMode]
Determines the device's mode of operation regarding the timer
(configured by the parameter RadiusLocalCacheTimeout) that
determines the validity of the user name and password (verified by
the RADIUS server).
 [0] Absolute Expiry Timer = When you access a Web page, the
timeout doesn't reset, instead it continues decreasing.
 [1] Reset Timer Upon Access = (Default) Upon each access to
a Web page, the timeout always resets (reverts to the initial
value configured by RadiusLocalCacheTimeout).
Web: Local RADIUS Password
Cache Timeout
[RadiusLocalCacheTimeout]
Defines the time (in seconds) the locally stored user name and
password (verified by the RADIUS server) are valid. When this
time expires, the user name and password become invalid and a
must be re-verified with the RADIUS server.
The valid range is 1 to 0xFFFFFF. The default value is 300 (5
minutes).
 [-1] = Never expires.
 [0] = Each request requires RADIUS authentication.
Web: RADIUS VSA Vendor ID
[RadiusVSAVendorID]
Defines the vendor ID that the device accepts when parsing a
RADIUS response packet.
The valid range is 0 to 0xFFFFFFFF. The default value is 5003.
Web: RADIUS VSA Access
Level Attribute
[RadiusVSAAccessAttribute]
Defines the code that indicates the access level attribute in the
Vendor Specific Attributes (VSA) section of the received RADIUS
packet.
The valid range is 0 to 255. The default value is 35.
To Next Page
Loading...
Need help?
General
