AudioCodes MediaPack Series MP-11x

Version 6.6 307 MP-11x & MP-124
User's Manual 27. SAS Configuration
Parameter Description
ditionalManipulation]

[0] No = (Default) Regular manipulation rule (not done in
addition to the rule above it).
 [1] Yes = If the above row entry rule matched the call, consider
this row entry as a match as well and perform the manipulation
specified by this rule.
Note: Additional manipulation can only be done on a different SIP
URI, source or destination, to the rule configured in the row above
as configured by the 'Manipulated URI' parameter (see below).
Manipulation Purpose
[IPInboundManipulation_Mani
pulationPurpose]
Defines the purpose of the manipulation:
 [0] Normal = (Default) Inbound manipulations affect the routing
input and source and/or destination number.
 [1]
Routing input only = Inbound manipulations affect the routing
input only, retaining the original source and destination number.
 [2] Shared Line = Used for the Shared-Line Appearance
feature. This manipulation is for registration requests to change
the destination number of the secondary extension numbers to
the primary extension. For more information, see BroadSoft's
Shared Phone Line Call Appearance for SBC Survivability.
Source IP Group ID
[IPInboundManipulation_SrcI
pGroup]
Defines the IP Group from where the incoming INVITE is received.
For any IP Group, enter the value "-1".
Source Username Prefix
[IPInboundManipulation_SrcU
sernamePrefix]
Defines the prefix of the source SIP URI user name (usually in the
From header).
For any prefix, enter the asterisk "*" symbol (default).
Note: The prefix can be a single digit or a range of digits. For
available notations, see 'Dialing Plan Notation for Routing and
Manipulation' on page 405.
Source Host
[IPInboundManipulation_SrcH
ost]
Defines the source SIP URI host name - full name (usually in the
From header). For any host name, enter the asterisk "*" symbol
(default).
Destination Username Prefix
[IPInboundManipulation_Dest
UsernamePrefix]
Defines the prefix of the destination SIP URI user name (usually in
the Request-URI).
For any prefix, enter the asterisk "*" symbol (default).
Note: The prefix can be a single digit or a range of digits. For
available notations, see 'Dialing Plan Notation for Routing and
Manipulation' on page 405.
Destination Host
[IPInboundManipulation_Dest
Host]
Defines the destination SIP URI host name - full name (usually in
the Request URI).
For any host name, enter the asterisk "*" symbol (default).
Request Type
[IPInboundManipulation_Req
uestType]
Defines the SIP request type to which the manipulation rule is
applied.
 [0] All = (Default) All SIP messages.
 [1] INVITE = All SIP messages except REGISTER and
SUBSCRIBE.
 [2] REGISTER = Only REGISTER messages.
 [3] SUBSCRIBE = Only SUBSCRIBE messages.
 [4] INVITE and REGISTER = All SIP messages except
SUBSCRIBE.

[5] INVITE and SUBSCRIBE = All SIP messages except