Parameter Description
IpProfile_FirstTxDtmfOption First Tx
DTMF
Option
TxDTMFOption
IpProfile_SecondTxDtmfOption Second Tx
DTMF
Option
TxDTMFOption
IpProfile_RxDTMFOption Declare
RFC 2833 in
SDP
RxDTMFOption
IpProfile_EnableHold Enable Hold EnableHold
IpProfile_InputGain Input Gain InputGain
IpProfile_VoiceVolume Voice
Volume
VoiceVolume
IpProfile_AddIEInSetup Add IE In
SETUP
AddIEinSetup
IpProfile_MediaIPVersionPreference Media IP
Version
Preference
MediaIPVersionPreference
Tel Profile Table
Web: Tel Profile
Settings
EMS: Protocol
Definition >
Telephony Profile
[TelProfile]
This table parameter configures the Tel Profile table. Each Tel Profile ID
includes a set of parameters (which are typically configured separately using
their individual, "global" parameters). You can later assign these Tel Profile IDs
to other elements such as in the <trunkgrouptableMP>Endpoint Phone Number
table (TrunkGroup parameter). Therefore, Tel Profiles allow you to apply the
same settings of a group of parameters to multiple channels, or apply specific
settings to different channels.
The format of this parameter is as follows:
[TelProfile]
FORMAT TelProfile_Index = TelProfile_ProfileName, TelProfile_TelPreference,
TelProfile_CodersGroupID, TelProfile_IsFaxUsed,
TelProfile_JitterBufMinDelay, TelProfile_JitterBufOptFactor,
TelProfile_IPDiffServ, TelProfile_SigIPDiffServ, TelProfile_DtmfVolume,
TelProfile_InputGain, TelProfile_VoiceVolume,
TelProfile_EnableReversePolarity, TelProfile_EnableCurrentDisconnect,
TelProfile_EnableDigitDelivery, TelProfile_EnableEC, TelProfile_MWIAnalog,
TelProfile_MWIDisplay, TelProfile_FlashHookPeriod,
TelProfile_EnableEarlyMedia, TelProfile_ProgressIndicator2IP,
TelProfile_TimeForReorderTone, TelProfile_EnableDIDWink,
TelProfile_IsTwoStageDial, TelProfile_DisconnectOnBusyTone,
TelProfile_EnableVoiceMailDelay, TelProfile_DialPlanIndex,
TelProfile_Enable911PSAP, TelProfile_SwapTelToIpPhoneNumbers,
TelProfile_EnableAGC, TelProfile_ECNlpMode, TelProfile_DigitalCutThrough,
TelProfile_EnableFXODoubleAnswer, TelProfile_CallPriorityMode;
[\TelProfile]
Notes:
For a description of this parameter, see Configuring Tel Profiles on page
194.
For a detailed description of each parameter, see its corresponding "global"
parameter.