EasyManuals Logo

AudioCodes MediaPack Series MP-11x User Manual

AudioCodes MediaPack Series MP-11x
622 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #602 background imageLoading...
Page #602 background image
User's Manual 602 Document #: LTRT-65417
MP-11x & MP-124
Parameter Description
The format of this parameter is as follows:
[AltRouteCauseTel2IP]
FORMAT AltRouteCauseTel2IP_Index =
AltRouteCauseTel2IP_ReleaseCause;
[\AltRouteCauseTel2IP]
For example:
AltRouteCauseTel2IP 0 = 486; (Busy Here)
AltRouteCauseTel2IP 1 = 480; (Temporarily Unavailable)
AltRouteCauseTel2IP 2 = 408; (No Response)
Note: For a detailed description of this table, see 'Alternative Routing
Based on SIP Responses' on page 235.
Reasons for Alternative IP-to-Tel Routing Table
Web: Reasons for Alternative
IP-to-Tel Routing
EMS: Alt Route Cause IP to
Tel
[AltRouteCauseIP2Tel]
This table parameter configures call failure reason values received
from the Tel side . If a call is released as a result of one of these
reasons, the device attempts to locate an alternative Hunt Group for
the call in the IP to Hunt Group Routing Table.
The format of this parameter is as follows:
[AltRouteCauseIP2Tel]
FORMAT AltRouteCauseIP2Tel_Index =
AltRouteCauseIP2Tel_ReleaseCause;
[\AltRouteCauseIP2Tel]
For example:
AltRouteCauseIP2Tel 0 = 3 (No Route to Destination)
AltRouteCauseIP2Tel 1 = 1 (Unallocated Number)
AltRouteCauseIP2Tel 2 = 17 (Busy Here)
AltRouteCauseIP2Tel 2 = 27 (Destination Out of Order)
Note: For a detailed description of this table, see 'Alternative Routing
to Trunk upon Q.931 Call Release Cause Code' on page 237.
Forward On Busy Trunk Destination Table
Web/EMS: Forward On Busy
Trunk Destination
[ForwardOnBusyTrunkDest]
This table parameter configures the Forward On Busy Trunk
Destination table. This table allows you to define an alternative IP
destination if a trunk is busy for IP-to-Tel calls.
The format of this parameter is as follows:
[ForwardOnBusyTrunkDest]
FORMAT ForwardOnBusyTrunkDest_Index =
ForwardOnBusyTrunkDest_TrunkGroupId,
ForwardOnBusyTrunkDest_ForwardDestination;
[\ForwardOnBusyTrunkDest]
For example, the below configuration forwards IP-to-Tel calls to
destination user “112” at host IP address 10.13.4.12, port 5060, using
transport protocol TCP, if Trunk Group ID 2 is unavailable:
ForwardOnBusyTrunkDest 1 = 2,
112@10.13.4.12:5060;transport=tcp;
Note: For a detailed description of this table, see 'Alternative Routing
to IP Destination upon Busy Trunk' on page 238.

Table of Contents

Other manuals for AudioCodes MediaPack Series MP-11x

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes MediaPack Series MP-11x and is the answer not in the manual?

AudioCodes MediaPack Series MP-11x Specifications

General IconGeneral
BrandAudioCodes
ModelMediaPack Series MP-11x
CategoryGateway
LanguageEnglish

Related product manuals