AudioCodes MediaPack Series MP-11x User Manual

Version 6.6 607 MP-11x & MP-124
User's Manual 43. Configuration Parameters Reference
Parameter Description

[1] = Enable
Source Phone Number Manipulation for Tel-to-IP Calls Table
Web: Source Phone Number
Manipulation Table for Tel > IP
Calls
EMS: SIP Manipulations >
Source Telcom to IP
[SourceNumberMapTel2IP]
This table parameter manipulates the source phone number for
Tel-to-IP calls. The format of this parameter is as follows:
[SourceNumberMapTel2Ip]
FORMAT SourceNumberMapTel2Ip_Index =
SourceNumberMapTel2Ip_DestinationPrefix,
SourceNumberMapTel2Ip_SourcePrefix,
SourceNumberMapTel2Ip_SourceAddress,
SourceNumberMapTel2Ip_NumberType,
SourceNumberMapTel2Ip_NumberPlan,
SourceNumberMapTel2Ip_RemoveFromLeft,
SourceNumberMapTel2Ip_RemoveFromRight,
SourceNumberMapTel2Ip_LeaveFromRight,
SourceNumberMapTel2Ip_Prefix2Add,
SourceNumberMapTel2Ip_Suffix2Add,
SourceNumberMapTel2Ip_IsPresentationRestricted,
NumberMapTel2Ip_SrcTrunkGroupID,
NumberMapTel2Ip_SrcIPGroupID;
[\SourceNumberMapTel2Ip]
For example:
SourceNumberMapTel2Ip 0 = 22,03,$$,0,0,$$,2,$$,667,$$,0,$$,$$;
SourceNumberMapTel2Ip 0 =
10,10,*,255,255,3,0,5,100,$$,255,$$,$$;
Note: For a detailed description of this table, see 'Configuring
Source/Destination Number Manipulation' on page 209.
Redirect Number Tel-to-IP Table
Web: Redirect Number Tel -> IP
EMS: Redirect Number Map Tel
to IP
[RedirectNumberMapTel2IP]
This table parameter manipulates the Redirect Number for Tel-to-
IP calls. The format of this parameter is as follows:
[RedirectNumberMapTel2Ip]
FORMAT RedirectNumberMapTel2Ip_Index =
RedirectNumberMapTel2Ip_DestinationPrefix,
RedirectNumberMapTel2Ip_RedirectPrefix,
RedirectNumberMapTel2Ip_RemoveFromLeft,
RedirectNumberMapTel2Ip_RemoveFromRight,
RedirectNumberMapTel2Ip_LeaveFromRight,
RedirectNumberMapTel2Ip_Prefix2Add,
RedirectNumberMapTel2Ip_Suffix2Add,
RedirectNumberMapTel2Ip_IsPresentationRestricted,
RedirectNumberMapTel2Ip_SrcTrunkGroupID,
RedirectNumberMapTel2Ip_SrcIPGroupID;
[\RedirectNumberMapTel2Ip]
For example:
RedirectNumberMapTel2Ip 1 = *, *, 4, 0, 255, , , 255, -1, -1;
Note: For a description of this table, see 'Configuring Redirect
Number Manipulation' on page 218.
Phone Context Table
Web: Phone Context Table
EMS: SIP Manipulations >
Phone Context
[PhoneContext]
This table parameter configures the Phone Context table. This
parameter maps NPI and TON to the SIP 'phone-context'
parameter, and vice versa.
The format for this parameter is as follows:

AudioCodes MediaPack Series MP-11x Specifications

General

Brand	AudioCodes
Model	MediaPack Series MP-11x
Category	Gateway
Language	English