 To configure the two pre-configured Web user accounts:
1. Open the Web User Accounts page (Configuration tab > System menu > Web User
Accounts). If you are logged in as Security Administrator, both Web user accounts
are displayed (as shown below). If you are logged in with the second user account,
only the details of this user account are displayed.
Figure 4-29: WEB User Accounts Page (for Users with 'Security Administrator' Privileges)
2. To change the username of an account:
a. In the 'User Name' field, enter the new user name.
b. Click Change User Name; if you are currently logged in to the Web interface with
this account, the 'Web Login' dialog box appears.
c. Log in with your new user name.
3. To change the password of an account:
a. In the 'Current Password' field, enter the current password.
b. In the 'New Password' and 'Confirm New Password' fields, enter the new
password.
c. Click Change Password; if you are currently logged in to the Web interface with
this account, the 'Web Login' dialog box appears.
d. Log in with your new password.
4. To change the access level of the optional, second account:
a. Under the Account Data for User: User group, from the 'Access Level' drop-
down list, select a new access level user.
b. Click Change Access Level; the new access level is applied immediately.
To Next Page
Loading...
Need help?
General
