The Web Users table appears, listing the two default, pre-configured Web use
accounts - Security Administrator ("Admin") and Monitor ("User"):
Figure 4-30: Web Users Table Page
2. Click the Add button; the following dialog box is displayed:
Figure 4-31: Web Users Table - Add Record Dialog Box
3. Add a user as required. For a description of the parameters, see the table below.
4. Click Submit.
Table 4-15: Web User Parameters Description
Parameter Description
Web: Username
Defines the Web user's username.
The valid value is a string of up to 40 alphanumeric characters,
including the period ".", underscore "_", and hyphen "-" signs.
Web: Password
Defines the Web user's password.
The valid value is a string of 8 to 40 ASCII characters, which must
include the following:
 At least eight characters
 At least two letters that are upper case (e.g., "AA")
 At least two letters that are lower case (e.g., "aa")
 At least two numbers
 At least two signs (e.g., the dollar "$" sign)
 No spaces in the string
 At least four characters different to the previous password
To Next Page
Loading...
Need help?
General
