PPC Manual Revision 1
(2) Setting Square Root Extraction and Low Signal Cutoff Point
Description
Output = Input
The slope equals “1” at levels below
the low signal cutoff point (A.SR=1).
The slope equals “0” at levels below
the low signal cutoff point (A.SR=2).
Output
Input
Output = Input
Output
Input
Low signal cutoff
point is variable.
Low signal cutoff
point is variable.
Setting Details
Parameter
symbol
Name
Display
level
Setting range Menu symbol
A.SR
A.LC
Chapter 5: Input Setting Functions
To Next Page
Loading...
