21-17
PPC Manual Revision 1
Chapter 21: Modbus/TCP Communication
21.7 IP Access Restriction Function
connect is permitted
PPC5 with
Ethernet
function
connect( )
connect( )
accept( )
connect request from
a device registered with
the permitted IP address
connect request from a
device not registered with
the permitted IP address
connect is rejected
Parameter
symbol
Group
display
Name Setting range Menu symbol Initial value
IPAR
E3
1.IP1
1.IP2
1.IP3
1.IP4
2.IP1
2.IP2
2.IP3
2.IP4
Note
*:
It takes about 20 seconds for the new settings of the Ethernet communication parameters to be
enabled.
To Next Page
Loading...
