22-3
PPC Manual Revision 1
Chapter 22: Coordinated Operation
22.2 Coordinated Items
Start-up condition of the Super function (overshoot suppressing function)
Parameter
symbol
Name Setting range
0:
1:
2:
3:
Operation mode (RUN/STOP) switching
PID number switching and switching over to the zone PID mode
Slave controller’s
PID number
selecting
action
Master
controller’s
setting
Slave: ZON=0
SP group number
selection 1
Slave: ZON=1
Zone PID selection
(selection by PV)
Slave: ZON=2
Zone PID selection
(selection by
target SP)
Slave: ZON=3
SP group
number
selection 2
Slave: ZON=4
Zone PID selection
(selection by SP)
Master: ZON=0
SP group number selection 1
Master: ZON=1
Zone PID selection (selection by PV)
Master: ZON=2
Zone PID selection (selection by
target SP)
Master: ZON=3
SP group number selection 2
Master: ZON=4
Zone PID selection
(selection by SP)
Note
To Next Page
Loading...
