17-2
PPC Manual Revision 1
Chapter 17: Software Setting Flow and Navigation
17.1 Setting Flow
The ProSense PPC5 series controller is made exclusively for AutomationDirect by
Yokogawa. The PPC5 controllers are a special version of the Yokogawa UT55A series.
ProSense Model Yokogawa Model (exclusive to AutomationDirect)
PPC5-1000 UT55A-000-11-00/S55
PPC5-1001 UT55A-001-11-00/S55
PPC5-1002 UT55A-002-11-00/S55
PPC5-1100 UT55A-040-11-00/S55
PPC5-1101 UT55A-041-11-00/S55
PPC5-1102 UT55A-042-11-00/S55
Reference the Manual Setting Values table in Section 17.4 Creating New Parameters
Using the Wizard Function
The operation guide describes how to set parameters to the controller, creating user
file information, monitoring, downloading, uploading, file management, printing, etc.
Note
Startup Guide window
Basic window
Set parameters
Download data
System Data
window
System Data
window
Monitor
Various Items
window
Execute
Communication
window
Window for
opening
Software
setting file
New (with Wizard)
New Open OthersUpload All
First startup window after installation of Software
*
* If the “View at startup” checkbox is checked in the
Startup Guide window, this window is always
displayed at startup.
Select any of the following functions from the menu.
Save a file
The Basic window is displayed.
(The File window is also displayed
simultaneously.)
Set parameters
Enter user file information
Save a file
Download data
Tune PID
Print
Starting up the Software
Exit Software
To Next Page
Loading...
