17-48
PPC Manual Revision 1
Chapter 17: Software Setting Flow and Navigation
17.13.9 Saving a CSV File
Save Parameter Data and File Information
Procedure
1.
2.
Description
Example of CSV format
Model UT55A-000-00-00
Control SGL
Product
Parameter R1.02.01
File Information
File Information
Customer Name
Delivery Destination
Device Name
Model Name
Order No.
Serial Number
Author
Date Created
Specification Number
Revision No.
Function Overview
Memo
System Data
Name Set Value
Model and suffix codes : UT55A-000-00-00
PARAMETER VERSION R1.02.01
CONTROL MODE SGL
INPUT SAMPLING PERIOD (CONTROL PERIOD) 100
LADDER SEQUENCE FUNCTIO
N DON'T USE
MCU VERSION
DCU VERSION
ECU-1 VERSION
ECU-2 VERSION
ECU-3 VERSION
ECU-4 VERSION
PRODUCT VERSION
Setup Parameter - CTL
D Register Symbol Name Set Value Unit
CNT_L1 CONTROL TYPE PID:PID control
ALG_L1 PID CONTROL MODE 0:Standard PID control mode
SPGR. NUMBER OF SP GROUPS 8
ALNO._L1 NUMBER OF ALARMS 4
ZON ZONE PID SELECTION 0:SP group number selection 1
PIDG. NUMBER OF PID GROUPS 8
Setup Parameter - PV
D Register Symbol N
ame Set Value Unit
IN PV INPUT TYPE OFF:OFF:Disable
UNIT PV INPUT UNIT C:Degree Celsius
RH MAXIMUM VALUE OF PV INPUT RANGE 1370
RL MINIMUM VALUE OF PV INPUT RANGE -270
BSL PV INPUT BURNOUT ACTION UP:Upscale
RJC PV INPUT REFERENCE JUNCTION COMPENSATION ON:RJC ON
ERJC PV INPUT EXTERNAL RJC SETPOINT 0 C
A.BS PV ANALOG INPUT BIAS 0 C
A.FL PV ANALOG INPUT FILTER OFF s
A.SR PV ANALOG INPUT SQUARE ROOT EXTRACTION OFF:No square root extrac
tion.
A.LC PV ANALOG INPUT LOW SIGNAL CUTOFF 1 %
To Next Page
Loading...
Need help?
General
