a
PPC Manual Revision 1
1st Edition : April 2020
All Rights Reserved, Copyright © 2020 AutomationDirect.com
Overview of this Publication
This User Manual describes the installation, configuration, and methods of operation of
the PPC5 series Prosense Advanced Process Controller.
Who Should Read This Manual
This manual contains important information for those who will install, maintain, and/or
operate any of the PPC5 series advanced process controllers.
Our technical support group is glad to work with you in answering your
questions. If you cannot find the solution to your particular application, or, if
for any reason you need additional technical assistance, please call technical
support at 770-844-4200. We are available weekdays Monday through Friday,
9:00 a.m.to 6:00 p.m. E.T.
We also encourage you to visit our web site where you can find technical and
non-technical information about our products and our company. Visit us at
www.automationdirect.com.
Safety Precautions
This instrument is a product of Installation Category II of IEC/EN/CSA/UL61010-1,
IEC/EN61010-2-201, IEC/EN61010-2-030 Safety Standards and Class A of EN61326-
1, EN55011 (EMC Standards). For use in Pollution Degree 2 environments.
CAUTION
This instrument is an EMC class A product. In a domestic environment, this
product may cause radio interference in which case the user needs to take
adequate measures.
The instrument is a product rated Measurement Category O (other).
* Measurement Category O (other)
This category applies to electric equipment that measures a circuit connected to a
low-voltage facility and receives power from stationary equipment such as electric
switchboards.
To Next Page
Loading...
Need help?
General
