Automationdirect.com prosense PPC5 Series - 17.6 Setting System Data

17-15
PPC Manual Revision 1
Chapter 17: Software Setting Flow and Navigation
17.6 Setting System Data
Procedure
1.

▪
Click on (or select) "New (with Wizard)" in the Startup Guide window and
click the [OK] button.
▪
Click on (or select) "New" in the Startup Guide window and click the [OK]
button.
▪
Click on "System Data" in the File window.
▪
Click on [File] – [New] in the menu.
▪
Click on [File] – [New (with Wizard)] in the menu.
▪
Click on the toolbar.
Items marked by an asterisk * are mandatory input fields.
LADDER SEQUENCE FUNCTION not used in the PPC5 controller.