23-77
PPC Manual Revision 1
Chapter 23: D Registers (Holding Registers)
System Setting (D6401 to D6500)
Register
No.
Description Range and meaning of value
D6401
R.MD
Restart mode
Set how the controller should recover from a power failure
of 5 seconds or more.
D6402
R.TM
Restart timer
Set time between power on and the instant where
controller starts computation.
0 to 10 s
D6403 to D6407
D6408
EPO
Input error preset output
Set preset output value when the input burnout or ADC
error occurs. Manual output is prioritized when input
burnout occurs in MAN.
0: Preset output
1: 0% output
2: 100% output
D6410
FREQ
Power frequency
0: AUTO
1: 60 Hz
2: 50 Hz
D6411 to D6416
D6417
QSM
uick setting mode
0
D6418
LANG
Guide display language
0
D6419 to D6420
D6421
U.DEF
Initialization to user default value
12345: Initialization, automatically returned to "0" after
initialization.
D6422
D6423
F.DEF
Initialization to factory default value
-12345: Initialization, automatically returned to "0" after
initialization. *
D6424
D6426 to D6430
D6431
LEVL
Parameter display level
1
D6432 to D6500
To Next Page
Loading...
Need help?
General
