Automationdirect.com prosense PPC5 Series - Switching PID According to PV

6-30
PPC Manual Revision 1
6.4.2 Switching PID According to PV
Description









PID of group 1
Minimum value of PV input range
Maximum value of PV input range
Reference point 1
Reference point 2
Reference point 3
Reference point 4
Reference point 5
Reference point 6
PID of group 2
PID of group 3
PID of group 4
PID of group 5
PID of group 6
PID of group 7
Change in PV
If the PV is currently positioned at this point,
control is based on the PID of group 6.




Chapter 6: Control Mode Settings