8-2
PPC Manual Revision 1
Chapter 8: Output Setting Functions
8.1 Setting Control Output Type
Description
Time Proportional Relay Output / Time Proportional Voltage Pulse Output
Control output pulse width = Control output (%) x Cycle time
100
0
0.0 50.0 100.0
ON
OFF
TC
Heater
Tank
SSR
ON/OFF signal
pulse output
Displayed output value (%)
On-time ratio
ON
Ristricted to the range
between output high
limit and output low
limit values.
Current Output
20 mA
4 mA
0.0 100.0
TC
Heater
Furnace
Displayed output value (%)
Control output
Control output
Ristricted to the range
between output high
limit and output low
limit values.
ON/OFF Output