23-58
PPC Manual Revision 1
Chapter 23: D Registers (Holding Registers)
Register
No.
Description Range and meaning of value
D5115
A.LC
0.0 to 5.0%
D5116 to D5120
D5121
IN_E1
RSP remote input type
4
D5122
UNIT_E1
RSP remote input unit Same as D5102
D5123 DP_E1 R
SP remote input decimal point position S
ame as D5103
D5124
RH_E1
Maximum value of RSP remote input
range
Depends on the input type.
- For temperature input -
S
- For voltage / current input -
S
et the range of a voltage / current signal that is applied.
The scale across which the voltage / current signal is actually
controlled should be set using the maximum value of input
(
D
5125
RL_E1
Minimum value of RSP remote input
range
D5126
SDP_E1
R
SP remote input scale decimal point position S
ame as D5103
D5127
SH_E1
M
aximum value of RSP remote input scale
S
ame as D5107, D5108
D5128
SL_E1
M
inimum value of RSP remote input scale
D
5129
BSL_E1
RSP remote input burnout action
Same as D5109
D5133
A.BS_E1
RSP analog input bias -
D5134
A.FL_E1
Same as D 5113
D5135
A.SR_E1
R
SP analog input square root extraction S
ame as D5114
D5136
A.LC_E1
Same as D5115
D5137
DI16.D_E1
DI16 contact type
0: The assigned function is enabled when the contact is
closed.
1: The assigned function is enabled when the contact is
opened.
To Next Page
Loading...
Need help?
General
