Procedure
1. Access the LDAP settings. From the XT Series web interface, select Administrator
Settings > System > LDAP. From the endpoint's main menu, select Configure >
Advanced > System > LDAP.
Figure 98: Configuring LDAP settings from the web interface
2. Select Add or Add Server.
Figure 99: Adding LDAP servers from the web interface
3. Configure the LDAP server settings as described in
Table 42: Configuring LDAP server
settings on page 141.
If your XT Series is managed by Scopia
®
Management, these fields are automatically filled.
Table 42: Configuring LDAP server settings
Field Name Description
Preferred Select Yes to view this LDAP's contacts in the Contacts page. Select No to define the LDAP
server but hide it from the Contacts page.
Table continues…
Configuring XT Series to use LDAP Directory
April 2015 Avaya Scopia
®
XT Series Deployment Guide 141
Comments? infodev@avaya.com
To Next Page
Loading...
Need help?
General
