The Avaya Scopia
®
XT Series SMB Edition includes the following options:
• Full SMB4 - Basic MCU level with up to four participants: one local and three remote endpoints
or PC clients.
• Full SMB9 - Advanced MCU level, with one local participant and up to eight remote endpoints
or PC clients.
There is no local endpoint if you deploy the XT Series as a server.
Important:
The Scopia
®
XT Executive and Avaya Scopia
®
XT4300 can host up to four participants.
Figure 10: Avaya Scopia
®
XT Series SMB Edition Deployment on page 26 shows a typical
topology for the Avaya Scopia
®
XT Series SMB Edition solution. For more information, see the
Solution Guide for Scopia
®
Solution.
Figure 10: Avaya Scopia
®
XT Series SMB Edition Deployment
As you add more XT Series endpoints, you can also manage them centrally with Scopia
®
Management. This would enable centralized updating, backing up and control.
Related Links
Planning the Topology of the Avaya Scopia
®
XT Series Deployment on page 24
Planning the Topology of the Avaya Scopia
®
XT Series Deployment
26 Avaya Scopia
®
XT Series Deployment Guide April 2015
Comments? infodev@avaya.com