Procedure
1. Define the name and language as described in Table 14: Defining name and language of the
XT Series on page 85.
Figure 54: Setting Country and Language
Table 14: Defining name and language of the XT Series
Field Description
System Name Enter the name of the XT Series in the System Name field. This
name is also used by default for the SIP username and the H.323
name, which can be manually changed.
System Name Unicode (Web interface only) Enter the name here if it includes non-ANSII
characters such as Chinese or Japanese.
Country Enter the country location of the unit. The system menu and the
Language field automatically changes to the language used in the
selected country.
Language Choose the language of the system menus.
Protocol Type Select the protocol the endpoint should use for calls, depending on
the organization’s existing infrastructure (SIP or H.323–based).
Contact your administrator for more information.
• H.323: Select if you are registering the endpoint to a gatekeeper
only. For more information, see Configuring Basic Gatekeeper
Settings on page 89 or contact your administrator.
• SIP: Select if you are registering the endpoint to a SIP server only.
For more information, see Configuring Basic SIP Settings on
page 90 or contact your administrator.
You can register the endpoint to as many as three SIP servers
(see Registering the XT Series to a SIP Server on page 107).
• H.323 and SIP: Select if you are registering the endpoint to both a
gatekeeper and a SIP server. For more information, see
Configuring Basic Gatekeeper Settings on page 89 and
Configuring Basic SIP Settings on page 90, or contact your
administrator.
Table continues…
Configuring Basic Settings with the Quick Setup Wizard
April 2015 Avaya Scopia
®
XT Series Deployment Guide 85
Comments? infodev@avaya.com
To Next Page
Loading...
Need help?
General
