Figure 53: TimeZone
2. Configure settings as described in Table 19: Configuring time zone related settings on
page 120.
Table 19: Configuring time zone related settings
Field Name Description
Enable Geolocation Select Yes to enable the XT Series to automatically
detect the correct time zone and to apply the appropriate
daylight time value. The default is Yes. Select No to
manually specify the time zone using the Time zone list
as well as the start/stop dates to apply daylight saving
adjustment.
Note:
Geolocation requires Internet access.
Time zone list Select the time zone to which the system belongs.
Enable daylight time Choose whether to enable daylight savings time.
Start (dd/mm) Set the day and month to indicate when daylight saving
time starts.
Stop (dd/mm) Set the day and month to indicate when daylight saving
time ends. If this is earlier than the start time, it assumes
the following year.
3. From the web interface only, select Save.
Related links
Configuring Basic Settings with the Quick Setup Wizard on page 110
Manually setting up the XT Series
August 2020 Deployment Guide for Avaya XT Series 120
Comments on this document? infodev@avaya.com
To Next Page
Loading...
