Figure 54: Single monitor video layouts with presentation
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series on page 151.
Procedure
1. Access the monitor settings. From the XT Series web interface, select Administrator
settings > I/O connections > Monitor. From the endpoint's main menu, select
Configure > Advanced > I/O connections > Monitor.
2. Select General to access the general settings.
Figure 55: General Monitor Settings
3. Configure the general settings:
Manually setting up the XT Series
August 2020 Deployment Guide for Avaya XT Series 122
Comments on this document? infodev@avaya.com
To Next Page
Loading...
