Procedure
1. Access the gatekeeper settings. From the XT Series web interface, select Administrator
Settings > Protocols > H.323 > General. From the endpoint's main menu, select
Configure > Advanced > Protocols > H.323.
2. Set the fields as described in
Table 36: Configuring H.323 settings on page 162.
Table 36: Configuring H.323 settings
Field Name Description
H.323 Name Enter the H.323 alias of this endpoint, used to register the unit
with the gatekeeper. In H.323 calls, this name is displayed on
participant's monitors (for example: John-Smith, or 9th-Floor-
Room, or NY-Office).
E.164 Enter this endpoint's E.164 dial number.
Gatekeeper Address You can use a DNS name to configure the gatekeeper address.
This allows dynamic resolution of the gatekeeper IP address and
in the case of multiple returned addresses, the endpoint registers
to the first available address.
3. From the web interface only, select Save.
4. Select H.323 > Gatekeeper.
Figure 74: Configuring the Gatekeeper settings from the web interface
5. Set the fields as described in
Table 37: Configuring the gatekeeper on page 163.
Advanced Configuration of the XT Series
August 2020 Deployment Guide for Avaya XT Series 162
Comments on this document? infodev@avaya.com
To Next Page
Loading...
