Figure 81: LDAP Settings
3. Configure the LDAP server settings as described in Table 45: Configuring LDAP server
settings on page 177.
If your XT Series is managed by Avaya Meetings Management, these fields are
automatically filled.
Table 45: Configuring LDAP server settings
Field Name Description
Preferred Select Yes to view this LDAP's contacts in the Contacts page. Select No to define the LDAP
server but hide it from the Contacts page.
Type Select the type of LDAP server you are configuring:
• Remote H.350 (Avaya Room System XT Series) refers to the built-in LDAP server of a
different XT Series. You can only view and call these contacts from this endpoint.
• Avaya Meetings Management (and Cloud) refers to Avaya Meetings Management's built-in
LDAP server. You can only view and call these contacts from this endpoint.
• Remote H.350 (generic) refers to a generic H.350–compliant server. You can only view and
call these contacts from this endpoint.
• Remote H.350 (third party) refers to a third-party LDAP server to support other
videocommunication vendors' directories, such as Polycom CMA.
Address Enter the LDAP server address. If you are using Avaya Meetings Management as your LDAP
directory, enter Avaya Meetings Management's IP address. If you are using Avaya Meetings
Management as Cloud, the address and the port are automatically configured.
Port Enter the port used to connect to the LDAP server. The default port is 389.
User Enter the username and password required to access the LDAP server. The format of the
username could be in the form of a Distinguished Name (DN). Some standard components of
Table continues…
Configuring XT Series to use LDAP Directory
August 2020 Deployment Guide for Avaya XT Series 177
Comments on this document? infodev@avaya.com
To Next Page
Loading...
