Without a license key to activate the product, you can only use the system in preview mode
for 30 days (effective power on time, not calendar days).
8. (Recommended) You can prevent users from altering advanced settings by changing the
default administrator PIN code, and you can optionally set a user PIN code to protect basic
settings too (see
Setting PIN Codes for the XT Series on page 231).
To change the default login settings for the XT Series web interface, see
Securing Web
Access to the XT Series on page 232.
9. If your XT Series is an endpoint, not just a server, configure your camera and microphone
settings, as described in:
• Configuring Cameras on page 126
• Configuring Microphones on page 131
10. If necessary for your deployment, configure your advanced network and call settings, as
described in
Configuring Advanced Network Settings on page 154. This includes, for
example:
• Setting the IP address
• Configuring the system in a SIP deployment
• Configuring call settings
• Enabling NAT and Firewall Traversal
• Registering the system with the gatekeeper
• Configuring the system to use an LDAP directory
Note:
If your system is autoprovisioned by Avaya Meetings Management, you can skip these
steps.
For more information about deployment setups, see Planning the Topology of the Avaya
Room System XT Series Deployment on page 32 and the Avaya Meetings Server Guide.
11. (Optional) If necessary for your organization, you can secure videoconference sessions via
encrypted connections and TLS certificates (see Securing your XT Series on page 231).
Important:
Using encryption is subject to local regulation. In some countries it is restricted or limited
for usage. For more information, consult your local reseller.
12. If your deployment includes Avaya Meetings Management, you can set up remote monitoring
and management of the XT Series using cloud provisioning.
13. You can remotely backup and restore the XT Series configurations via Avaya Meetings
Management, as described in
Enabling System Logs and Remote Initialization on page 255,
or use the same configuration files to duplicate the same settings across multiple endpoints
in an organization.
Initial Workflow for Deploying the Avaya Room System XT Series
August 2020 Deployment Guide for Avaya XT Series 30
Comments on this document? infodev@avaya.com
To Next Page
Loading...
