4
Aviat Networks
front panel 2-14
front panel details 2-9
front panel layout
PDH and SDH IDUspe 2-9
installation
power supply 3-24
max frame size 2-13
modes of operation 2-11
Portal login overview 2-17
priority mapping 2-12
protection
switch conditions 2-16
protection criteria 2-16
reset option 2-19
reset options 2-19
temporary DHCP server function 2-17
transport channel 2-12
IF loopback
for Edge 4-105
incorrect path calculations 5-18
indoor unit
earthing for Edge 1-3
maximum Tmra 1-4
informational events for Edge 5-27
installation 3-1, 3-25
antenna 3-4
antennas 3-4
Connect ES indoor unit 3-25
Edge install overview 3-2
IDU 3-23
new Edge software 4-75
ODU
polarization 3-5
ODU overview 3-4
ODUspe 3-4
ODUspe cable 3-11
ODUspe cable grounding 3-14
ODUspe cable requirements 3-13
ODUspe coupler 3-9
ODUspe surge suppressors 3-16
outdoor 3-4
outdoors for Edge 3-4
overview for new Edge installation 4-31
Portal for Edge 4-8
prerequisites for Edge 3-2
site diagram 3-15
tools and equipment 3-2
interference
Edge traffic 5-17
RSL/RSSI filtering for Edge 3-29
IP address
autodiscovery 4-18
configuring addressing and routing 4-63
IP reset
for Edge IDUspe 2-19
L
LEDs 5-19
states for Edge 5-19
lifting Edge equipment 1-2
lightning
ODUspe surge suppressor installation 3-16
surge suppressor 1-4
lightning surge suppressor
ODUspe 2-7
link
configuration for Edge 4-37
link and ring logic
for Edge 5-7
link performance
for Edge 4-96
link protection
Edge 2-15
switching conditions for Edge 2-15
loading new Edgesoftware 4-75
locks
safety timer operation 4-107
loopbacks
bus loopbacks for Edge 4-114
circuit loopbacks for Edge 4-114
points of Edge application 4-113
safety timer for Edge 4-107
M
maximum
ambient temperature 1-4
mechanical loading 1-4
module
naming and renaming for Edge 4-84
N
naming
modules of Edge 4-84
network overview
view in Portal 4-83
NMS
configuration trap destinations 4-66
DHCP server configuration for Edge 4-69
DHCP server function for Edge 4-67
interface IP addressing and routing for Edge