NOTE: – In some situations, it is possible for a PC to receive a copy of the packet it sent. This condition
is subject to the operating system and/or network configuration. If received, such a received packet
should be detected (by checking the message type) and discarded.
In this example for the Discover packets, empty sections for Name, MAC, IP, NetMask and Gateway are shown. These
empty fields in the Discover packet are not necessary and are an artifact of the application used to test the iVu Discovery
Protocol
DISCOVER_REPLY Message
The DISCOVER_REPLY packet is sent by the sensor in reply to a DISCOVER message. For the body portion of the message
it will contain all of the parameters detailed above.
NOTE: In some situations, a network switch/router will receive a broadcast packet and duplicate it. This
will result in the controlling PC receiving multiple responses that are completely identical. This can be
handled by discarding multiple replies that have the same correlation tag.
iVu Plus TG Gen2 Image Sensor
www.bannerengineering.com - Tel: 763.544.3164 101
To Next Page
Loading...
