Chapter 2 THEORY OF OPERATION
2 - 24
2.3.3.3.3 SYRINGES Group
The SYRINGES configuration group allows the operator to individually enable and disable
various syringe manufacturers and/or syringe sizes offered by them. This group, as follows,
contains three syringe manufacturers each offering seven syringe sizes:
NOTE
At least one syringe manufacturer must be enabled.
2.3.3.3.4 DEFAULTS Group
DEFAULTS group options affect the way the pump initializes certain programming
selections when ▲
▲▲
▲ or ▼
▼▼
▼ is pressed. Four default options are available:
1. DFAULT LIBRARY
2. DFAULT PROTOCOL
3. DFAULT MODE
4. DFAULT MFR
2.3.3.3.5 MISC Group
Nine options are available within the MISC (miscellaneous) group. They include:
1. REMOTE CONTROL
2. LIBRARY
3. SIZE OVERRIDE
4. PSI RANGE
5. AUDIO RANGE
6. RATE RANGE
7. AUTO LOCK
8. BACKLITE
9. ENABLE DB9 PORT
B-D® Monoject® Terumo®
1 mL Plastic 1 mL Plastic 1 mL Plastic
3 mL Plastic 3 mL Plastic 3 mL Plastic
5 mL Plastic 6 mL Plastic 5 mL Plastic
10 mL Plastic 12 mL Plastic 10 mL Plastic
20 mL Plastic 20 mL Plastic 20 mL Plastic
30 mL Plastic 35 mL Plastic 30 mL Plastic
60 mL Plastic 60 mL Plastic 60 mL Plastic
To Next Page
Loading...
Need help?
General
