Technical Specifications
Hillrom Progressa ICU Hospital Bed Instructions for Use (171528 REV 15) 123
Applied Parts (in accordance with IEC 60601-1)
Scale Classification (European Scale Beds Only)
Nurse Call Connection Requirements
For information about the Nurse Call connection requirements, refer to the SideCom Communication
System Design and Application Manual (DS059). Contact the Nurse Call manufacturer to make sure the
Nurse Call system is compatibility with the bed.
Surface Compatibility
Warning—The Envision E700 surface on the Hillrom Progressa ICU Hospital Bed frame is not fully
compliant to the
IEC 60601-2-52:2009 standard; however, it is compliant with the FDA Guidance: Hospital Bed System
Dimensional and Assessment Guidance to Reduced Entrapment [Issued March 10, 2006] standard. Use
of a surface in combination with the product that is not fully compliant to the IEC 60601-2-52:2009
standard may increase the risk of patients becoming trapped. In such cases, the patient must be
monitored closely.
Warning—The following surfaces can be used with the Hillrom Progressa ICU Hospital Bed with the
Dining Chair feature option. Do not use the following surfaces with the Chair Egress option. Do not use
the FlexAfoot feature with the following surfaces:
• P500 MRS
• NP100 Surface—flat deck 36" x 84" (91 cm x 213 cm)
• AccuMax Surface—flat deck 36" x 84" (91 cm x 213 cm)
• Accella Therapy MCM Surface P006788A—flat deck 36" x 84" (91 cm x 213 cm)
Siderail Headboard
Footboard Caregiver Pendant
Sleep deck Sleep surface
Line manager Head extension
Proning accessory
Condition Range
Technical and Quality Standards EN 45501
Classification per EN 45501 Class III
Bed Configuration Available Surface
Dining
Chair
Chair
Egress
Chair Egress with
StayInPlace
Feature
Prevention Therapy Pulmonary
(CLRT only)
Full
Pulmonary
(CLRT and
P &V)
X X X X X
X X X X X
X X X X X
To Next Page
Loading...
Need help?
General
