Graphical Caregiver Interface (GCI) Controls
Hillrom Progressa ICU Hospital Bed Instructions for Use (171528 REV 15) 29
Help (?) Menu
BED EXIT ALERT
Bed Exit Mode Descriptions
The Bed Exit Alerts system has three levels of sensitivity settings to select from:
Through the Help menu control at the bottom right of the
screen, you can access additional instruction for many of
the bed functions and features.
1. Press the Help control.
2. Press the control for the subject that you want to view.
Not all controls are available on all beds.
Patient Position Mode—this mode alerts when the patient moves towards
either siderail or moves away from the head section, such as sits up in bed.
Exiting Mode—this mode alerts when a patient moves away from the center of
the bed towards an egress point.
Out of Bed Mode—this mode alerts when the patient's weight shifts
significantly off the frame of the bed.
Turn ON the Alert
1. Make sure the patient is centered on the bed and aligned with the hip locator.
2. Press the Alerts menu control on the GCI screen.
To Next Page
Loading...
Need help?
General
