Graphical Caregiver Interface (GCI) Controls
Hillrom Progressa ICU Hospital Bed Instructions for Use (171528 REV 15) 41
Zero/Tare the Scale or New Patient
The Zero/Tare function lets the caregiver reset the scale system before a new patient uses the bed.
1. Remove equipment and accessories from the bed.
2. Make sure the bed is in the correct position for Zero/Tare. Refer to “Recommended Bed Position to
Weigh a Patient and Required Bed Position to Zero/Tare the Bed” on page 40.
2. Press Scale.
3. Press History. Follow the on-screen instructions.
– Press the dots to view more information
about previously saved weights.
3. Press the Scale menu control on the GCI home screen.
To Next Page
Loading...
