EasyManua.ls Logo

baxter Hillrom Progressa - Decommissioning and Disposal Instructions

baxter Hillrom Progressa
156 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Accessories
Hillrom Progressa ICU Hospital Bed Instructions for Use (171528 REV 15) 101
EXPERIENCE POD DEVICE (OVERHEAD ARM) (P7546A01)
8. Install the Allen ICU prone head positioner. See Allen ICU
Prone Head Positioner Instructions for Use (773439) to install
and to make adjustments to the prone head positioner.
To Use
To use the proning accessory, see Allen ICU Prone Head Positioner Instructions for Use (773439).
To Remove
1. Make sure the patient is not on the proning accessory before you remove it.
2. Remove the prone head positioner (see Allen ICU Prone Head Positioner Instructions for Use
(773439)).
3. Remove the head adapter bracket support from the traction equipment sockets.
4. If applicable, disable any lockout controls.
5. Adjust the IV Pole and transport handles, as applicable.
6. Install the headboard.
Item Description Item Description
A Personal Electronic Device (PED) cord
storage
C PED holder
BUSB charging port

Table of Contents

Related product manuals