Graphical Caregiver Interface (GCI) Controls
38 Hillrom Progressa ICU Hospital Bed Instructions for Use (171528 REV 15)
View Weight History
The GCI screen will show the initial weight of the patient and will allow you to view at least 21 weights
that were taken. The screen will show the date and time, last zero, the weight, and how much weight
was adjusted.
3. Press the desired function. Follow the on-screen
instructions.
• Adjust Weight—manually enter the patient’s
estimated weight.
• Add/Remove Items—manually change the
weight for items added or removed from the bed.
• lb—change weight units (available on some beds)
1. Press the Scale menu control on the GCI screen.
2. Press Scale.
3. Press the History.
If the weight was taken in a Not Recommended Position,
an icon will appear, which shows the status of the bed
when the weight was taken.
Use the arrows or touch a dot to see different weights.
To Next Page
Loading...
Need help?
General
