Graphical Caregiver Interface (GCI) Controls
Hillrom Progressa ICU Hospital Bed Instructions for Use (171528 REV 15) 45
SETTINGS/PREFERENCES
Through the Settings menu control, you can—
• Reset the bed for a new patient.
• See the history of the scale, bed exit, some bed positions, and surface therapies.
• Set the preferred language to show on the GCI screen.
• Set the time and date.
• Update the software (only for beds equipped with wireless connectivity).
• Turn on or off the WiFi connection.
• View the software version of the bed.
Views
Bed Exit: Displays the time spent with the Bed Exit alert on.
Head Angle: Time spent with the head of bed more than 30° or 45° since 12 AM with Head Angle alert
active.
Scale: Displays the saved weights in 24-hour periods.
Rotation: Displays the maximum number of cycles/ hour the patient has rotated and hrs: mins in
rotation, in 24 hours periods.
P&V: Displays the number of Percussion and Vibration treatments provided per 24-hour period.
Chair: Time spent in Chair position since 12 AM.
Opti-Rest: Time spent in Opti-Rest mode since 12 AM.
To clear histories, refer to “Zero/New Patient” on page 34 or “Zero/Tare the Scale or New Patient” on
page 41.
Change the Language
1. Press the Settings menu control on the GCI screen.
2. Press Language and select the applicable language.
3. Press Accept.
New Patient
The New Patient control clears the weight history and Therapy Statistics, re-zeroes the scale, and
resets Patient Comfort.
History
1. Press the Settings menu control on the GCI home
screen.
2. Press History to see Bed Exit alert history, Head
Angles, Weigh Patient History, Rotation Therapy,
Percussion and Vibration Therapy, Chair, and Opti-
Rest.
– A History control is also present in each area
of the GCI screen that has history associated
with it. For example, the bottom of the
Rotation screen.
To Next Page
Loading...
Need help?
General
