Graphical Caregiver Interface (GCI) Controls
48 Hillrom Progressa ICU Hospital Bed Instructions for Use (171528 REV 15)
WiFi On/Off
To use the WiFi option, the bed must be connected to a wireless network. Contact your local
representative to complete this setup.
Bedside Association
The Bedside Association feature permits the caregiver to associate the bed to a room and patient
through WiFi. This feature uses the facility’s electronic chart to associate a room and patient to the bed.
You must have a compatible version of the Smart Bed Connectivity to connect the bed to operate this
feature.
This feature is enabled by a service/maintenance technician through the service menu on the GCI
screen (per the facility’s request).
1. Press the Settings menu control.
2. Press WIFI On/Off.
3. Press On or Off.
4. Press Back to return to the Home screen.
To Next Page
Loading...
