Graphical Caregiver Interface (GCI) Controls
Hillrom Progressa ICU Hospital Bed Instructions for Use (171528 REV 15) 47
Make sure of these:
• There is not a patient on the bed.
• The wireless is on and connected to the wireless network, see “WiFi On/Off” on page 48.
1. Press the Settings menu control.
2. Press Software Update.
3. The New Bed Software Available screen shows on the
GCI screen. Do the following:
• Press Update Later to return to the Home screen.
or
• Press Continue to continue with the software
update.
4. Press Update Later to return to the Home screen.
or
Press Start Update to begin the software update.
A progress Software Update screen will show.
To Next Page
Loading...
