Graphical Caregiver Interface (GCI) Controls
46 Hillrom Progressa ICU Hospital Bed Instructions for Use (171528 REV 15)
Adjust Time and Date
Version
The Version control shows the software versions on the bed.
1. Press the Settings menu control on the GCI screen.
2. Press Version.
Software Update
To receive software update notifications, the bed must be connected to the wireless network, see “WiFi
On/Off” on page 48.
1. Press the Settings menu control.
2. Press Adjust Date/Time.
3. Set the following:
•Date
• Time
• 12 Hour or 24 Hour
•Daylight Saving
4. Press Accept.
A Caution screen will show with these reminders:
• Removal of all patient history
• Resetting the New Patient Date
• Resetting the Zero Scale Date
A software update is available for the bed when—
• A purple software update indicator shows on the Settings menu control and the Software
Update control.
To Next Page
Loading...
