EasyManuals Logo

baxter Hillrom Progressa User Manual

baxter Hillrom Progressa
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #146 background imageLoading...
Page #146 background image
Technical Specifications
134 Hillrom Progressa ICU Hospital Bed Instructions for Use (171528 REV 15)
Security Protocol: Wireless Protected Access II (WPA2)
Supported Authentication Options for WPA2:
•Pre-Shared Key (PSK)
Enterprise (802.1X)
Supported Encryption Options for WPA2:
Advanced Encryption Standard (AES)
Supported Extensible Authentication Protocol (EAP)
Types for 802.1X:
PEAP-MSCHAPv2
PEAP-GTC
NOTE:
The current firmware for the Progressa Beds WiFi (internal wireless module) interface does not support
802.11r fast transition authentication key management (AKM)—fast transition-pre-shared key (FT-PSK)
or 802.1x-FT. Cisco/Meraki wireless local area networks (WLANs) on which
Progressa Beds will be
connected that use 802.11r must have their AKM modified to Fast Transition: Adaptive. For other WiFi
vendors, please refer to their documentation for adaptive, fast transition AKM strategies.
Wireless System Characteristics
Characteristic
Description
Frequency Band—2.4 GHz FCC: 2.4 GHz to 2.483 GHz
ETSI: 2.4 GHz to 2.483 GHz
MIC: 2.4 GHzto 2.495 GHz
KC: 2.4 GHz to 2.483 GHz
Frequency Band—5GHz FCC: 5.15 GHz to 5.35 GHz, 5.725 GHz to 5.825 GHz
ETSI: 5.15 GHz to 5.35 GHz, 5.47 GHz to 5.725 GHz
MIC: 5.15 GHz to 5.35 GHz, 5.47 GHz to 5.725 GHz (W56)
KC: 5.15 GHz to 5.25 GHz, 5.725 GHz to 5.825 GHz
Modulation BPSK @ 1, 6, 6.5, 7.2, and 9 Mbps
QPSK @ 2, 12, 13, 14.4, 18, 19.5, and 21.7 Mbps
CCK @ 5.5 and 11Mbps
16-QAM @ 24, 26, 28.9, 36, 39, and 43.3 Mbps
64-QAM @ 48, 52, 54, 57.8, 58.5, 65, and 72.2 Mbps
Network Standards IEEE 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h,
802.11i, 802.11n
Data Rates Supported 802.11a (OFDM): 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b (DSSS, CCK): 1, 2, 5.5, 11 Mbps
80211g (OFDM): 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (OFDM, HT20, MCS 0-7): 6.5, 13, 19.5, 26, 39, 52, 58.5, 72.2 Mbps and 7.2,
14.4, 21.7, 28.9, 43.3, 57.8, 65 Mbps
Transmit Power Settings 802.11a: 6 Mbps 15 dBm, 54 Mbps 13 dBm (PER - 10%)
802.11b: 1 Mbps 16 dBm, 11 Mbps 16 dBm (PER - 10%)
802.11g: 6 Mbps 16
dBm, 54 Mbps 14 dBm (PER - 10%)
802.11n (2.4 GHz): MCS0 Mbps 16 dBmMCS7 Mbps 12 dBm
80211n (5 GHz): MCS0 Mbps 15 dBm, MCS7 Mbps 12 dBm

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the baxter Hillrom Progressa and is the answer not in the manual?

baxter Hillrom Progressa Specifications

General IconGeneral
Brandbaxter
ModelHillrom Progressa
CategoryMedical Equipment
LanguageEnglish

Related product manuals